Drivers Hp Laserjet 1020 For Mac



Drivers for Windows Drivers
  1. Hp laserjet 1020 printer driver for mac free download - HP LaserJet Family PostScript Printer Driver, LaserJet 4050 USB-MAC Printer Driver , HP 4500 All In One Printer Driver, and many.
  2. Download the latest drivers, firmware, and software for your HP LaserJet 1020 Printer.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.

如何在Mac OS X上安装HP Laserjet 1020的驱动程序. 虽然HP没有明确地提供Laserjet 1020的Mac驱动程序,但我们可以采用一种变通方案。要在Mac OS X上安装HP Laserjet 1020的驱动程序,请参考以下方法。 关闭并断开打印机。.


Support Windows XP/Vista/7/8/8.1 and Windows server 2003 (32/64-bit)
HP Laserjet Full Feature and Software
Download (81mb)
Drivers For OS X Mavericks
  1. Download and install the package below: http://support.apple.com/kb/dl907
  2. From System Preferences, click on Print & Scan.
  3. Click the Plus sign. Select the listed LJ 1020 printer.
  4. Click the drop down menu next to Use or Print Using and click on
  5. Select Printer Software.
  6. Select the HP Laserjet 1022 from the list.
  7. Click OK to confirm your selection and add the printer, then try printing using the configured print queue.

Drivers for OS X Snow Leopard
  1. Download the driver from http://support.apple.com/kb/dl907
  2. Turn on the printer and connect it to the Mac.
  3. Open the printer preference page, press the ‘+’ button to add the printer.
  4. In the ‘add printer’ dialog, make sure that the printer is visible.
  5. Open the driver list.
  6. Select HP Laserjet 1022, but not the gutenberg version.

Drivers Hp Laserjet 1020 For Mac Driver

Driver for OS X Lion

Drivers Hp Laserjet 1020 For Mac Desktop


Drivers Hp Laserjet 1020 For Mac Download

  1. Download the driver from http://support.apple.com/kb/dl907
  2. Install the drivers
  3. Plug in printer, go to system preferences
  4. Add your printer, select the hp 1022 software from the newly installed hp drivers.
  5. You can also try with version 1.3.1022.