X32 – How do I Setup for Live Streaming with V4 firmware?
TRANSFER: You may not rent, lease, lend, sell, redistribute, sublicense or provide commercial hosting services with the Software. You may, however, make a one-time permanent transfer of all of your license rights to the Software to another end user in connection with the transfer of ownership of your Product, provided that: (i) the transfer must include your Product and all of the Software. Behringer X32 Usb Driver Download Mac BEHRINGER USB AUDIO DRIVER is a Shareware software in the category Miscellaneous developed by BEHRINGER USB AUDIO DRIVER. It was checked for updates 63 times by the users of our client application UpdateStar during the last month. Dec 27, 2019 Connect the X32 to your computer via USB. Windows users will first need to install the latest driver available from Behringer. No driver installation is required for Mac. Launch your DAW and select the X32 as the audio input/output device. Create tracks in your DAW and assign each input to the correct input channel. Download Behringer X-USB Universal USB ASIO Driver 4.59 (Sound Card).
This guide is intended to assist with setting up a stereo output stream from your X32 to a streaming software like OBS or FB Live.
First, if you are using a PC make sure you have the proper driver installed. There are multiple drivers available but that is because they are for the different expansion cards. Select the driver that matches your expansion card (X-USB, X-UF, X-LIVE)
You can find the downloads for all of the X32 drivers at:
Now, after connecting via USB to your computer from the expansion card, you should see that your Mac or PC recognizes that the expansion card has been connected and you should have options within your operating system’s sound settings to choose the X-USB, X-UF or X-LIVE as your Playback or Recording device.
You should also see the expansion card as an input option with your streaming software (OBS, FB Live, YouTube etc). Select the Expansion card as the input device. Typically with streaming software, the software will only look at the first two channels coming in via USB from the mixer, so it will be important to send the mix that you want to the first two USB Outputs on the mixer, so that your streaming software receives the right information.
In order to do this, follow the process below.
- Open the ROUTING menu on your X32 and Navigate to the CARD tab.
- In the first column (1-8) assign P16 1-8 (this is assuming you are NOT using a P16 system for monitoring purposes. If you are using a P16 system you should assign OUTPUT 1-8). This is pictured below. You will notice that on the right side of the menu you can see a breakdown of which signals are routed to the outputs. That is the next step
- Navigate to the P16 page (OUT, if using the OUTPUT 1-8 option because you have a P16 system in use). The left most column in this menu is the option to select which output “pathway” you are working with. Highlight output 1 (01 @).
- With 01 @ highlighted, use the 4th column (OUT SIGNAL) to select MATRIX 1, and use the 5th column (TAP) to select POST FADER
- Repeat for Output 2 (02 @) and MATRIX 2, POST FADER
- On the surface of your X32, select MATRIX 1. Open the HOME menu and press the LINK button (1st encoder) to link MATRIX 1 and MATRIX 2 as an LR pair.
- Now, you have a decision to make. You will have to decide if you want the mix going out to your stream to be identical to the Main Mix (the House mix) or if you need it to be a separate mix. If you choose to run a complete separate mix, select two mix busses (for example, 1 and 2) SELECT BUS 1. Open the HOME menu and hit the LINK button to LINK busses 1 and 2.
- Now create your stream mix using the selected busses. To send signal to the busses you can use the SENDS ON FADER feature or the HOME>SENDS menu with your channels selected.
- Now that you have either your pair of busses or your Main Mix ready to be sent out to the stream, SELECT either the Main LR or MIX BUS 1.
- Open the HOME>SENDS menu. You should see 6 faders on the screen. These represent the 6 matrices. Raise the digital faders for 1-2. They should raise together as they are linked. This step is sending your mix to the matrix channels (matrix channels which you’ve already assigned to the USB Outputs 1-2).
- Press the DOWN arrow (Layer Down) button to expose the Mode 1-2, Mode 3-4 and Mode 5-6 options above the 1st, 3rd and 5th encoder. Rotate the 1st encoder counterclockwise and select PRE. This will change the send TAP point from the Main LR or Mix Busses to the Matrix to PRE FADER which will allow you to freely lower the LR mix or Busses without adjusting the stream level.
- Finally, open the MATRIX bank of faders on the X32 and raise the faders for MATRIX 1-2
- You should now be able to hear and see your mix signal present in the streaming software
Behringer X32 Driver For Mac Download
Keywords: X32, X32 Compact, X32 Producer, X32 Core, X32 Rack, M32, M32R, M32C, Streaming, #N/A, X32 COMPACT, X32, X32, X32, X32 PRODUCER-TP-EU(B), X32 COMPACT-SAA, X32 COMPACT-UL(B), X32 PRODUCER, X32 PRODUCER-TP-AR, M32-BR, M32R LIVE-EU(B), M32, M32C-EU, X32, X32 CORE-BR, X32 PRODUCER-TP-JP, X32 V2-SAA, X32 RACK-UK(B), M32R LIVE, X32 V2,